User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
Figure B-3
¾ Setting IP address manually
1 Select Use the following IP address radio button, and the following items are available. If
the Router's LAN IP address is 192.168.1.1, type 192.168.0.x (x is from 1 to 253) into the
IP address field and 255.255.255.0 into the Subnet mask field.
2 Type the Router’s LAN IP address (the default IP is 192.168.1.1) into the Default gateway
field.
3 Select Use the following DNS server addresses radio button. In the Preferred DNS
Server field you can type the DNS server IP address, which has been provided by your ISP
-233-