User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
To modify A Reserved IP address:
1. Select the reserved address entry to your needs and click Modify. If you wish to delete the
entry, click Delete.
2. Click Save to keep your changes.
To delete all Reserved IP addresses:
1. Click Clear All.
Click Next to go to the next page and Click Previous to return the previous page.
)
Note:
The changes won't take effect until the device reboots.
6.9 System Tools
System Tools option helps you to optimize the configuration of your device. SNMP can help
you to manage the device locally or remotely with specified software. The diagnostic tools (Ping
and Traceroute) allow you to check the connections of your network components. You can
upgrade the AP to the latest version of firmware as well as backup or restore the AP’s
configuration files. Ping Watch Dog can help to continuously monitor a particular connection to
a remote host. It’s suggested that you change the default password to a more secure one
because it controls access to the device’s web-based management page. Besides, you can find
out what happened to the system in System Log.
There are nine submenus under the System Tools menu (shown as Figure 6-24): Time
Settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot,
Password, System Log, and Statistics. Clicking any of them will enable you to configure the
corresponding function. The detailed explanations for each submenu are provided below.
Figure 6-24 The System Tools menu
-216-