User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
throughput information Wireless statistics enables you to get detailed information about the
current connected wireless stations.
There are six submenus under the Wireless menu (shown in Figure 6-7): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics.
Click any of them, and you will be able to configure the corresponding function. The detailed
explanations for each submenu are provided below.
Figure 6-7 Wireless menu
6.7.1 Wireless Settings
Selecting Wireless > Wireless Settings will enable you to configure the basic settings for your
wireless network on the screen below (Figure 6-8).This page allows you to configure the
wireless mode for your device. Six operation modes are supported here, including Access
Point, Client, Repeater and Bridge with AP. The available setting options for each operation
mode are different from those of the other.
1) Access Point: This mode allows wireless stations to access this device.
Figure 6-8 Wireless Settings in Access Point mode
-194-