User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
c). You will see the following screen when the new device successfully connected to the
network.
)
Note:
1) The status LED on the Router will light green all the time if the device has been
successfully added to the network.
2) The WPS function cannot be configured if the Wireless Function of the Router is disabled.
Please make sure the Wireless Function is enabled before configuring the WPS.
6.6 Network
Figure 6-5 the Network menu
There is one submenu under the Network menu (shown in Figure 6-5): LAN. Click it and you
will be able to configure the LAN function.
The Network option allows you to customize your local network manually by changing the
default settings of the AP.
Selecting Network will enable you to configure the IP parameters of Network on this page.
-192-