User's Guide

PW-3G401M 3G Wireless N Nano Router
6. Select the Internet Access (here takes 3G/4G Only for example.) and click Next.
Figure 3-6 Quick Setup – Internet Access
¾ 3G/4G Preferred
In this mode, the Router will try 3G/4G access first;
When 3G/4G access fails and WAN access is valid, or when no 3G/4G USB modem is
inserted, the Router would switch to WAN access; when the Router succeeds to connect to
the 3G/4G network, the Router would stop the WAN connection and switch back to 3G/4G
access immediately.
¾ WAN Preferred
In this mode, the Router will try WAN access first;
When the WAN access fails, and 3G/4G access is valid, the Router would switch to 3G/4G
access; when the Router succeeds to connect to the WAN network, the Router would stop
the 3G/4G connection and switch back to WAN access immediately.
¾ WAN Only
In this mode, the Router will try WAN access only. 3G/4G access is disabled.
¾ 3G/4G Only
In this mode, the Router will try 3G/4G access only. WAN access is disabled and the
ethernet port acts as a LAN port.
7. Select your Location and Mobile ISP, and then click Next.
If you can’t find your location and/or mobile ISP in the drop-down list, please click Set the
Dial Number, APN, Username and Password manually to manually set them according
to the information your 3G/4G ISP provided.
-12-