User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
Figure 5-71 Bandwidth Control Rules List
¾ Description - This is the information about the rules such as address range.
¾ Egress bandwidth - This field displays the max and mix upload bandwidth through the
WAN port. The default is 0.
¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the
WAN port. The default is 0.
¾ Enable - This displays the status of the rule.
¾ Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add a Bandwidth Control rule, follow the steps below.
Step 1: Click Add New… shown in Figure 5-71, you will see a new screen shown in Figure
5-72.
Step 2: Enter the information like the screen shown below.
Figure 5-72 Bandwidth Control Rule Settings
Step 3: Click the Save button.
5.15 IP & MAC Binding
Figure 5-73 the IP & MAC Binding menu
-169-