User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
1. Connect one end of the provided USB cable to mini USB port of the Router and the other
end to the power adapter, and then plug the power adapter to a standard electrical wall
socket.
2. Connect to the target remote AP or Router wirelessly.
3. Connect the notebook/PC to the Router via an Ethernet cable or wirelessly.
z Client Mode
In this mode, PW-3G401M acts as a wireless adapter to enable the wired host to access AP or
wireless Router. Obviously, here the LAN/WAN port is used as LAN port.
1. Connect one end of the provided USB cable to mini USB port of PW-3G401M and the other
end to the power adapter, and then plug the power adapter to a standard electrical wall
socket.
2. Connect the PC to the LAN/WAN port of the PW-3G401M via an Ethernet cable.
3. Connect PW-3G401M to the target AP or Router wirelessly.
-8-