User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
1.4 Panel Layout .4 Panel Layout
Figure 1-1 Front Panel sketch
LED
To check the different status of the LED:
Status Indication
On The Router is working properly.
Flashing The Router is transferring data.
Off The Router is not working properly.
3G USB Modem Port
Reset Button
Mini USB Port
LAN/WAN Port
Figure 1-2 Rear Panel sketch
¾ 3G USB Modem Port: This port is used to plug a 3G modem/card.
¾ Reset Button: Use a pin to press the button for several minutes when the LED flashes, you
can reset the Router to its factory defaults.
¾ Mini USB Port: This port is used to connect the provided power adapter.
¾ LAN/WAN Port: This RJ45 Ethernet port can be LAN or WAN port depending on the
working mode.
-4-