User manual

Page 42
IP CAMERA USER MUANUAL
8 Q & A
1. Q: Forget password
AJoint the default line and GND line to reset.
Note: Default IP: 192.168.226.201
User name: admin
Password: 123456
2. QWhy cant the devices connect through IE browser?
A: Network doesn’t connect well. Please check the connection and make sure it
connected well.
B: IP is not available. Reset the valid IP.
C: Web port number has been revised: contact administrator to get the correct port
number.
D: Exclude the above reasons. Recover default setting by jointing the default line and
GND line.
Note: default IP: 192.168.226.201mask number: 255.255.255.0
3. QIP tool cannot search devices.
AIt may be caused by the anti-virus software in your computer. Please exit it and try to
search device again.
4. QIE cannot download ActiveX control.
a. IE browser blocks ActiveX. Please do setup following below.
Open IE browser. Click Tools-----Internet Options….
select Security------Custom Level….Refer to Fig 4-1
Enable all the sub options under “ActiveX controls and plug-ins”. Refer to Fig 4-2