User manual

Page 25
IP CAMERA USER MUANUAL
3. Delete：Select certain FTP account; Click this button to delete this account
4. Test ：Select certain FTP account; Click this button to test its valid or not.
Please refer to the following table for parameters and instructions of FTP configuration.
Fig 5-20 Add
5.5 Advanced Configuration
Advanced configuration includes five submenus: User Configuration, Onvif
Configuration, Security Configuration, Configure Backup & Restore, Reboot and
Upgrade.
5.5.1 User Configuration
Enter into "User Configuration" interface. Refer to Fig 5-21:
Add user:
1. Clicking "Add" button pops up "Add user" dialog box. Please refer to Fig 5-22:
Fig 5-21 User Configuration Fig 5-22 Add User
Note: After bind physical address to the IP-CAM, user can access the device on this PC
in network only. If the MAC address was ““00:00:00:00:00:00” which means it can be
connected to any computers.
2. Input user name in "User Name" textbox (only letters).
3. Input characters in "Password" and "Confirm Password" textbox (letters or numbers).
4. Input the MAC address of the PC in "Binding MAC address" textbox.
5. Click “OK” button and then the new added user will display in the user list.
Parameter
Meaning
Server name
The name of the FTP server
Server address
The address of the FTP server
Port
The port number of the FTP server
User name
The user name of the FTP server
Password
The password of the FTP server
Path
The save path for FTP files