User manual
Page 24
IP CAMERA USER MUANUAL
5.4.9 Mail Setting
Enter into “Network Configuration” “Mail Setting” interface. Please refer to Fig
5-18.
Fig 5-18 Mail Setting
1. From Email: sender’s e-mail address
2. User name and password: sender’s user name and password
3. Server address: SMTP name of sender
4.Select the secure connection type at the Secure Connection pull down list according to
user’ actual needs
5. Receival email address list: add email address into the list
6. Receival email address: receiver’s e-mail address
7. After all parameters setup, user can click “Test your account settings”. If email sent
successful, a “Test Successful” window will pop up, if not, users can try other email
addresses or check the setting.
Notice: If user change the static IP into PPPoE and select mailbox, there will be an
e-mail sent to users’ mail box for notify a new IP address.
5.4.10 FTP
Enter into Network ConfigurationFTP interface; please refer to Fig 5-19:
Fig 5-19 FTP Setting
1. Add: Click Add button to input FTP server’s server name, address, port number, user
name, password, and upload path, click OK to confirm the setting. Refer to Fig 5-20:
2. Modify：User can click this button to change some information of the FTP server