2 Mega Pixel Water-Proof IP Camera DAI-390IP04 User Manual Read this instruction carefully for correct use of the product
PROVISION-ISR DAI-390IP04 User Manual 1080P IR Anti-Vandal Fixed Lens IP Dome Camera For H.
Before use this product Before operation, we strongly advise users to read this manual and keep it properly for using later. There may be several technically incorrect places or printing errors in this manual. The updates will be added into the new version of this manual. The contents of this manual are subject to change without notice. When this product is in use, the relevant contents of Microsoft, Apple and Google will be involved in.
IP CAMERA USER MUANUAL Table of Contents 1 Introduction.........................................................................................................1 1.1 Summarization ............................................................................................................................. 1 1.2 Check Package Content ................................................................................................................ 1 1.3 Connection ..............................................
IP CAMERA USER MUANUAL 6 Onvif Configuration ........................................................................................... 26 5.5.3 Security Configuration........................................................................................ 27 5.5.4 Configure Backup & Restore ............................................................................... 27 5.5.5 Reboot Device ................................................................................................... 28 5.5.
Page 1 IP CAMERA USER MUANUAL 1 Introduction 1.1 Summarization This device (short for IP-CAM) is designed for high performance CCTV solutions. It utilizes most advanced technologies, such as video encoding and decoding technology and complies with the TCP/IP protocol, SoC., etc to ensure this system more stable and reliable. This unit consists of two parts: the IP-CAM device and central management software (short for CMS).
Page 2 IP CAMERA USER MUANUAL 2 Installation 2.1 Install IP-CAM to Ethernet Network The connection of digital video server is show below. Figure 2-1 Connection User can connect the PC and IP-CAMERA in accordance with above picture. Before connecting, please connect external devices, and then connect the power. The connection steps are as shown below: Step 1: Connect IP-CAM firstly. Step 2: Internet line connect to Internet transfer equipment or devices Step 3: Connect power cable to a power outlet. 2.
Page 3 IP CAMERA USER MUANUAL Item CPU Memory HDD Specification Intel Pentium 3.0 GHz or AMD 3000+ 1GB 160GB Recommended PC Specification -9 channels: Item CPU Memory HDD Specification Intel Core 2 Duo 1.8 GHz or AMD Dual core 3800+ 1GB 250GB Recommended PC Specification -16 channels: Item CPU Memory HDD Specification Intel Core 2 Duo 2.2 GHz or AMD Dual core 3800+ 2GB 250GB Notice: The AMD chip hyper-3800+ and X64 series are not tested.
Page 4 IP CAMERA USER MUANUAL 3 IE Remote Access User can connect IP-Cam through LAN or WAN. Here only take IE browser (6.0) for example. The details are as follows: 3.1 LAN In LAN, there are two ways to access IP-Cam: 1. access through IP-Tool; 2. directly access through IE browser. 3.1.1 Access through IP-Tool Step 1: Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the PC from the CD. Step 2: Use IP-Tool to modify the network of IP-Cam.
Page 5 IP CAMERA USER MUANUAL For example, the network segment of this computer is 192.168.13.x under the local config table. So, please modify the IP address, Gateway of IP-Cam which must be in the same network segment with the computer. Modifying the network, you have to input the password and click “OK” button to save the setting. Note: The default user name is: admin. The default password is: 123456. The new IP address of this device will display after modification.
Page 6 IP CAMERA USER MUANUAL IP address: 192.168.226.201 Subnet Mask: 255.255.255.0 Gateway: 192.168.226.1 HTTP: 80 Data port: 9008 When use the IP-CAM for the first time, you should connect the device with the above default settings. Step 1: Manual setup the IP address of the PC. The network segment should be as same as the default settings of IP-CAM. Right click “My Network Places” icon on the desktopselect “properties” as shown in the left figure.
Page 7 IP CAMERA USER MUANUAL 3.2 WAN a． Access through router or virtual server Step1: Connecting according to above steps in LAN; enter into System ConfigurationNetwork configurationBasic configuration to setup the port number as shown in Fig 3-1: Step 2: Enter into System ConfigurationNetwork configurationIP configuration to change IP address as shown in Fig 3-2: Notice: The steps above should be saved after the change of the port and IP address. Log back in the device with the saved setting.
Page 8 IP CAMERA USER MUANUAL 4 Remote Preview 4.1 The Remote Preview Interface Fig 4-1 Remote Preview 1 4 7 10 People icon Zoom in Start record Enable audio 2 5 8 Fix size Zoom out Playback 3 6 9 Zoom in Full screen Snap When motion detection alarm is triggered, the people icon turns red. Click icon to zoom in the preview image to suitable size. Drag the cursor on the enlarged image to view suitable preview area. Click enlarged image. Click icon to full-screen the live image.
Page 9 IP CAMERA USER MUANUAL Fig 4-2 record playback interface After selecting the record date, the record files will be displayed in the record file list box. You can double click a certain record file to playback or check a certain file. Then click Play button to do playback. 4.3 Right-click Function Clicking right mouse will appear a pull-down list as below: Stream: There are two options. Turn off the live: Click this item will close present live preview.
Page 10 IP CAMERA USER MUANUAL scroll bar to view all captured pictures.
Page 11 IP CAMERA USER MUANUAL 5 Remote Live Surveillance Functions of remote configurations include: System Configuration, Video Configuration, Alarm Configuration, Network Configuration and Advanced Configuration. User should firstly select the menu on the left, and then setup the relative parameters. When a user setup parameters of a certain device, other users can not setup this device. 5.1 System Configuration The “System configuration” includes two submenus: Basic Information and Date & Time. 5.1.
Page 12 IP CAMERA USER MUANUAL 5.1.2 Date & Time Configuration Setting steps: 1. Enter into "System Configuration" “Date & Time”. Refer to Fig 5-2: 2. Select “Modify Time ", user can self-define time. Choose "Time Zone" according to your location. 3. Enable DST to set DST mode and time. 4. Setup time by select the “Synchronize with NTP Server”. 5. Press the "Save" button to save the settings. Fig 5-2 Date &Time Config 5.
Page 13 IP CAMERA USER MUANUAL 2. User can adjust Brightness, Contrast, Hue and saturation of the picture. 3. Select white balance mode. 4. .WDR, Sharpen, denoise, frequency and CVBS format are adjustable. 5. User can also enable the image mirror and image overturn function. 6. Click “Start Repair” button to repair bad point in the image. 7. Press the "Save" button to save the settings. 5.2.2 Video Stream 1.
Page 14 IP CAMERA USER MUANUAL 5.3 Alarm Configuration Alarm configuration includes three submenus: Motion Detection Area, Motion Detection Trigger and Motion Detection Schedule. 5.3.1 Motion Detection Area 1. Enter into “Alarm configuration""Motion Detection Area" to see an interface as shown Fig 5-6: 2. Move the "Sensitivity" scroll bar to setup the motion trace sensitivity. 3.
Page 15 IP CAMERA USER MUANUAL Fig 5-7 Motion Alarm Trigger 5.3.3 Motion Detection Schedule Enter into “Alarm configuration" "Motion Detection schedule" interface as shown in Fig 5-8: Week schedule User could set the alarm time from Monday to Sunday for alarm everyday in one week. Note: The lengthwise means one day of a week; the rank means 24 hours of a day. Mouse clicks on the pane to set the alarm hours. Green means selected area. Blank means unselected area. 2.
Page 16 IP CAMERA USER MUANUAL Fig 5-8 Motion Detection Schedule 5.4 Network Configuration Network configuration includes ten submenus: Port, Wired, NET traversal Config, Server Configuration, IP Notify, DDNS Config, RTSP, UPNP, Mail Setting and FTP. 5.4.1 Port 1. Enter into "Network config""Port" to see the interface as shown in Fig 5-9: Fig 5-9 Port Config 2. Input port number for IE access in the "HTTP Port" textbox. 1.
Page 17 IP CAMERA USER MUANUAL Fig 5-10 Wired Config 2. There are two Options for setup IP: obtain an IP address auto by DHCP protocol and use the following IP address, user can choose one of options for requirements. 3. Use the following IP address: display the IP address, subnet mask, gateway and DNS of the device. 4. PPPOE: User needs to manual input the user name and password for dial-up internet.
Page 18 IP CAMERA USER MUANUAL Fig 5-12 Login 4. Input the only device ID of the IP-CAM or user-defined name. And then input user name and password. Note: The default user name and password are “admin” and “123456” respectively. 5.4.4 Server Configuration Enter into “Network Configuration” “Server Config”. Please refer to Fig 5-13: Fig 5-13 Server Configuration 1. Check “Do you want IP Camera to connect Server. 2. Check the IP address and port of the transfer media server in the ECMS/NVMS.
Page 19 IP CAMERA USER MUANUAL Fig 5-14 IP Notify Config 5.4.6 DDNS Configuration 1. Domain name Registration （http://provision-isr-dns.com） Note: DDNS is used to register for a hostname with DDNS username and password. Provision ISR now allows you to use our mint DDNS server in order to create a virtual address for your DVR/NVR/IP-Camera on the internet. Each account is limited to 35 different addresses using your preferred domain name address instead of using IP addresses.
Page 20 4) IP CAMERA USER MUANUAL If there is no problem with the domain registration you will see the following message: “Your domain was successfully created.” If you do not see this message, the domain name you requested is already in use and you will be requested to provide an alternate domain name (please note: domain name is sometimes called host name).
Page 21 IP CAMERA USER MUANUAL 1. Apply the Domain Name (Take dns2p for example) (1) Register in the Web Step 1: Fill in the blank of IE address with ‘www.dns2p.com’. Step 2: Click to enter the website. Step 3: Click "New User" in the right of homepage to register. For example: User ID is ‘abc’, and password is ‘123456’. The register dialog display as below: Register dialog box (2) Login Step 1: Return to homepage after registering successfully.
Page 22 IP CAMERA USER MUANUAL Note: Time of probationary period is one month. If user wants to use it continuatively after one month, please Step 4: click "Buy Now" in the right of homepage to pay for it. 2. Setup in the IP-CAMERA ⑴ DOMAIN Domain is set in ‘1. Apply the Domain Name’. According to the example above, the domain is ‘WWW. IP-CAMERA.dns2p.com’. ⑵ USER ID Username of registered which is set in ‘(1) Register in the Web’. According to the example above, user ID is ‘abc’.
Page 23 IP CAMERA USER MUANUAL 3.RTSP Address: An example of the RTSP address inputted in the media player. 4. You can also choose to enable anonymous viewer login. Note: This device support VLC player. You can download the VLC player from the related website. Then run this player and input RTSP address by selecting “File” and clicking “Open URL”. After that, you can monitor the live image through VLC player. 5.4.8 UPNP Enter into “Network Configuration” “UPNP” interface as shown in Fig 5-17.
Page 24 IP CAMERA USER MUANUAL 5.4.9 Mail Setting Enter into “Network Configuration” “Mail Setting” interface. Please refer to Fig 5-18. Fig 5-18 Mail Setting 1. From Email: sender’s e-mail address 2. User name and password: sender’s user name and password 3. Server address: SMTP name of sender 4.Select the secure connection type at the Secure Connection pull down list according to user’ actual needs 5. Receival email address list: add email address into the list 6.
Page 25 IP CAMERA USER MUANUAL 3. Delete：Select certain FTP account; Click this button to delete this account 4. Test ：Select certain FTP account; Click this button to test its valid or not. Please refer to the following table for parameters and instructions of FTP configuration.
Page 26 IP CAMERA USER MUANUAL Modify user: 1. Select the user which needs to modify password and physical address in the user configuration list box. 2. Clicking “Modify” button will pop up “Modify user” dialog box as shown below. Fig 5-23 Modify User 3. Input original password of this user in the “password” text box. 4. Input new password in the “New password” and “Confirmation” text box. 5. Input computer’s physical address which is used to access the server in the “User PC MAC” text box. 6.
Page 27 IP CAMERA USER MUANUAL Fig 5-24 Onvif Config 5.5.3 Security Configuration Enter into Advanced ConfigurationSecurity Configuration to see a tab shown in Fig 5-25: Check “Enable IP address” check box, select “Deny the following IP address”, input IP address in the IP address list box and click “Add” button.
Page 28 IP CAMERA USER MUANUAL User can import or export the setting information from PC or to device. 1. Click “Browse” to select save path for import or export information on PC. 2. User can import or export all setting information to PC, but those two settings “user configuration” and “network configuration” are exceptional. Fig 5-26 Backup and Restore Configuration Default Configuration Click “Load default” button to restore all system settings to default status. 5.5.
Page 29 IP CAMERA USER MUANUAL 6 Mobile Surveillance This IP-CAM supports mobile surveillance by phones with Windows mobile, iPhone, Android and Blackberry OS. Please check the operation system version of mobile before use; and connect the IP-CAM to Internet. 6.1 Network Configuration Access device via LAN Step 1: Connect device via wireless router. Then checkmark DHCP both in router and device to automatically acquire IP address or enter the IP address manually.
Page 30 IP CAMERA USER MUANUAL 6.2 By Phones with iPhone OS Install through Iphone. Step 1: Open App Store software as shown in the figure on the left. Step2: Search “Provision Cam” and click “Free” button as shown in the figure on the right. Step 3: Click “Install App” button as shown in the figure on the left. Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically. Install Software through PC Step 1: Install iTunes store in PC and then login.
Page 31 IP CAMERA USER MUANUAL "Provision Cam" Instruction 1. Login Step 1: Choose network type. There are two network connection ways: 3G/3G +WIFI, enhanced video quality. This network supports main stream and sub stream. The real-time image will be displayed by using sub stream. 3G, normal video quality compared to the former network type. Step 2: Input server, account and password. Server: WAN IP address (or domain name) plus HTTP port of the device. For example: 210.21.183:89 or 123.dvrdydns.com:89.
Page 32 IP CAMERA USER MUANUAL ：Screen mode button. You can choose 1，4，6，8，9， 13 or 16 screen display mode. ：Favorite channel display button. If you save your favorite channel in the favorite server list, clicking this button will directly play all favorite channels you have saved. ：Snap button. Choose the channel and click this button to capture the channel image. ：Local record button. Choose the channel and click this button to start recording. ： Open/Close audio.
Page 33 IP CAMERA USER MUANUAL to delete this device. Edit device: Click button behind the device name to edit the information of this device. Backup & restore: It is recommended to click “Backup” button to reserve the information of all devices. Then you can click “Restore” button to restore all device information after you re-install the client or delete the device uncarefully.
Page 34 5. IP CAMERA USER MUANUAL Fig 2 Fig 3 Fig 4 Fig 5 CMS Function This function makes multi-device managements and preview come true. Step 1: Click to enable CMS function. When this icon turns green, it means this function is enabled. Step 2: Click to choose channel as shown in the right picture. After you choose the channel, click “ok”, the system will display the related image automatically. If channels have been added into the group, you can see the images by clicking the group name.
Page 35 IP CAMERA USER MUANUAL Favorite channels of the device Step 1: Click to enter into device management list. Click the device name to extend channel. Enlighten the channels to save favorite channels as shown in the following picture on the left. Step 2: Return to the main interface and click button to play the favorite channels. Favorite groups of CMS Enable CMS function and enlighten the group to save the favorite groups as shown in the following picture on the right.
Page 36 IP CAMERA USER MUANUAL 6.3 By Phones with Android Software Installation Step 1: Run “Play Store” (or Google market) program. Step 2: Search “Provision Cam”. Step 3: Press “Install” button. Step 4: Install the software subject to the notes. Once the downloading is done, the software will install automatically Login Menu Step 1: Configure the network of your device and mobile phone. Step 2: Input the WAN IP address/domain name and port of your device in the sever column.
Page 37 Main Menu IP CAMERA USER MUANUAL Live View The first picture The previous picture Next picture The last picture Zoom in Zoom out Delete Record Playback: Click “Playback” in the main menu interface to enter playback interface. Then choose the channel you want to playback. This will take you to see the record file. Click this file to play. Pause/Play Stop Forward Backward Server List: In the main menu interface, click “Server list” to see the above picture on the left hand.
Page 38 IP CAMERA USER MUANUAL Settings: In the main menu interface, click “Settings” to enter the settings interface where you can configure local settings. Click “Local” to enter local settings interface. In this interface, you can set favorite channel and storage. Favorite Channel: Check the favorite channels and click “Save” button to save these channels. Then go into live interface and click button to play these favorite channels. Storage: Setup the relevant parameters of mobile video.
Page 39 7 IP CAMERA USER MUANUAL Use method for IP-TOOL Updating through IP-Tool Note: Do not cut off power supply and internet when updating; If the device is unable to start because of the failure of upgrade, it needs to retrofit. First， acquire the IP-Tool from the supplier and then double click the IP-Tool icon to run this software. Then the device can be searched; if the device can’t be searched, please check whether the PC and the device connect to the network or not.
Page 40 IP CAMERA USER MUANUAL Modify IP address and click OK button to exit the dialog box, IP-Tool will display the new IP address. Upgrading Software Select the device and right click to choose “Update software” menu. Input the username and password. Then click “browse” button to choose the upgrade software. Finally, click “Update software” to start upgrading. When upgrading, please do not disconnect PC and the device and make sure the power is on.
Page 41 IP CAMERA USER MUANUAL Enter into Kernel upgrade dialog box, input user name and password, click “Browse” to select the Update file (mboot8180-8180) and click “Update” button to start updating. When upgrading, please do not disconnect PC to device and make sure the power is on. The update progress bar will display as below: After finishing upgrading, a message box will pop up. After a while, the device will restart automatically.
Page 42 IP CAMERA USER MUANUAL 8 Q&A 1. Q: Forget password A：Joint the default line and GND line to reset. Note: Default IP: 192.168.226.201 User name: admin Password: 123456 2. Q：Why can’t the devices connect through IE browser? A: Network doesn’t connect well. Please check the connection and make sure it connected well. B: IP is not available. Reset the valid IP. C: Web port number has been revised: contact administrator to get the correct port number. D: Exclude the above reasons.
Page 43 IP CAMERA USER MUANUAL Fig 4-1 Fig 4-2 ④ then click ok to finish setup. b. Other plug-ins or anti-virus blocks ActiveX. Please uninstall or close them. 5. Q：No sound can be heard. A：Without connect audio input device. Please connect and try again. B: Without enable audio function at the corresponding channel. Please check AUDIO item to enable this function. 6. Q：Why can’t the device connect to wireless? A: Check the statues of wireless router.
Page 44 IP CAMERA USER MUANUAL 9 Specification Model Image Sensor Effective Pixels Electronic Shutter Day & Night Min.
Page 45 Notes: IP CAMERA USER MUANUAL
Page 46 IP CAMERA USER MUANUAL
