User manual

11 12
- You can choose Auto/Manual option and set brightness level,
AGC level or mode on/off.
SETUP MENU
LENS AUTO
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT BLC
PICT ADJUST
ATR ON
MOTION DET ON
NEXT
EXIT SAVE ALL
- Scroll to SHUTTER/AGC using ▲ or ▼.
- Press O to enter the SHUTTER/AGC menu.
- Use ◄ or ► to select Auto and press O to enter the
AUTO SETUP menu.
AUTO SETUP
HIGH LUMINANCE
MODE SHUT+AUTO IRIS / AUTO IRIS
BRIGHTNESS |------|-----------------|
LOW LUMINANCE
MODE AGC
BIRHGTNESS x0.50
RETURN
HIGH LUMUNANCE
- MODE – Use ◄ or ► to set AUTO IRIS (Recommended).
- BRIGHTNESS – Use ◄ or ► to set brightness level between
0 – 255.
LOW LUMUNANCE
AGC level – At low lightning conditions, if the image is too dark –
select higher AGC level which means that the camera would amplify
the CCD input signal and make image will become brighter but
noisier.
- Mode – Use ◄ or ► to use AGC mode or turn it OFF.
- Brightness - Use ◄ or ► to set brightness level between x0.25/
x0.50/ x0.75/ x1.0.
RETURN – Return to previous menu.
2) a) SHUTTER/AGC
Here you can control SHUTTER function such as brightness level
and AGC mode.
The shutter – Controls the amount of light according to your own
environment. Increase SHUTTER value in dark places for a brighter
picture,
Decrease SHUTTER value in places with more light for reducing
amount of light.
alarm shop