EN ES alarm shop Digital CCTV Camera Effio-E Box USER MANUAL www.provision-isr.com English / Spanish www.provision-isr.
Content EN English Manual 1 ES Manual en Español 34 alarm shop WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Note: Only professional technicians is allowed to open the front or back cover of this camera. ADVERTENCIA PELIGRO DE CHOQUES NO ABRIR NotA: Solo técnicos profesionales pueden abrir las cubiertas frontal o posterior de esta cámara. I Note: In order to avoid electrical shock or fire, please use proper power according to the manual.
Content Features Features Precautions Structure and Components System connection OSD Menu OSD Menu Operation 1) LENS 2) SHUTTER/AGC 3) WHITE BAL 4) BACKLIGHT 5) PICT ADJUST 6) ATR (Adaptive Tone Reproduction) 7) PRIVACY 8) DAY/NIGHT 9) NR 10) CAMERA ID 11) SYNC 12) LANGUAGE 13) CAMERA RESET Specifications 2 2 3 6 7 9 9 11 15 18 19 21 23 24 27 29 31 32 33 34 • 650TV Lines. • 2D-DNR • OSD control. • 0.03 Lux sensitivity • Motion detection • HLC • Color rolling control • Privacy masking Precautions 1.
Structure and Components Details: ① OSD Menu ② Indicator Led ③ Socket Auto Iris Lens ④ Video out ⑤ Power Supply Socket Mount screw Lens Operation Steps Tailplate alarm shop Lens mount ring Tailplate Sketch Socket Auto Iris Lens 1 2 4 ③ On the camera casing 3 (1) Use the designated power supply supplied by the vendor. (2) Fasten the Lens you have chosen onto the "Lens Mount ring". In case of Auto Iris Lens, connect the Lens cable to the "Auto Iris Socket".
(8) Connect the control cable (RS485+ and RS485-) to the computer/DVR neat the "Level Knob" ⑤. System connection Monitor BNC Automatic Aperture BNC Equip with automatic aperture lens. The definitions of the pins of the control cable are as follows (e.g.
OSD Menu OSD Main Menu Main Menu ▲ - Joystick Up – Moves the cursor upwards. ▼ - Joystick Down – Moves the cursor downwards. ◄ - Joystick Left – Moves the cursor to the left/change selection. ► - Joystick Right – Moves the cursor to the right/change selection. O - Joystick button – Press the Joystick to execute selections and displays a Submenu for an item with the mark.
OSD Menu Operation - Use ▲ or ▼to scroll the setup page. 1) LENS AUTO IRIS The LENS menu allows you to set the lens which attached to You’re camera. MANUAL IRIS LENS: Where the aperture is fixed or set manually by the user. Iris is mechanism which closes and opens allowing more or less light into the lens. AUTO IRIS LENS: In which the aperture is continuously controlled by the camera to automatically set to the desired level of brightness.
2) a) SHUTTER/AGC Here you can control SHUTTER function such as brightness level and AGC mode. The shutter – Controls the amount of light according to your own environment. Increase SHUTTER value in dark places for a brighter picture, Decrease SHUTTER value in places with more light for reducing amount of light. - You can choose Auto/Manual option and set brightness level, AGC level or mode on/off. - Use ◄ or ► to select Auto and press O to enter the AUTO SETUP menu.
b) From the main menu SHUTTER/AGC MANUAL SETTINGS. - Scroll to SHUTTER/AGC using ▲ or ▼. SETUP MENU LENS SHUTTER/AGC WHITE BAL BACKLIGHT PICT ADJUST ATR MOTION DET AUTO AUTO ATW BLC ON ON NEXT EXIT - Use ▲ or ▼ to move up and down in the menu. - Use ◄ or ► to change SHUTTER value between 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000. - Use ◄ or ► to change AGC value between 6.00/ 12.00/ 18.00/ 24.00/ 30.00/ 36.00/ 42.00/ 44.80.
a) ATW 3) WHITE BAL White balance adjustment - adjust the white balance of color necessary for the correct reproduction of colors including white as white and other colors based on it. In changing light conditions (changing the color temperature of light), white balance needs to be done again. White balance setting can be adjusted according to the color temperature of object. - Scroll to WHITE BAL using ▲ or ▼.
b) USER 1/USER 2 4) BACKLIGHT Manually adjusts blue color lever and red color level. B-GAIN – Blue color level. R-GAIN – Red color level. - From main menu - Scroll to WHITE BAL using ▲ or ▼. - Use ◄ or ► to select USER 1 and press O to enter USER 1 menu. You can select between the special backlights modes – BLC or HLC according to your envioroment or turn it off. counter light, taillight, facilitating the photographed object to be separated from the background.
HLC (highlight compensation) - Scroll to PICT ADJUST using ▲ or ▼. (function that suppresses strong headlights at night and improves visibility to provide clear images with superb picture quality. SETUP MENU LENS SHUTTER/AGC WHITE BAL BACKLIGHT PICT ADJUST ATR MOTION DET AUTO AUTO ATW BLC ON ON NEXT EXIT SAVE ALL alarm shop - Press O to enter to PICT ADJUST menu.
6) ATR (Adaptive Tone Reproduction) improves the ability to create more detailed picture in both high and low luminance areas exist in the same picture. Here you can adjust luminance level (refers to both high and low luminance) and contrast level according to your envioronment. - Scroll to ATR using ▲ or ▼. SETUP MENU LENS SHUTTER/AGC WHITE BAL BACKLIGHT PICT ADJUST ATR MOTION DET NEXT EXIT AUTO AUTO ATW BLC ON ON - Scroll to NEXT using ▲ or ▼.
8) DAY/NIGHT 7) PRIVACY This function is aiming at the protection of personal privacy, you can select up to 4 parts on the screen to be masked with colored cover size and location of the area is also adjustable. - Scroll to DAY/NIGHT using ▲ or ▼. SETUP MENU Not in use. PRIVACY DAY/NIGHT NR CAMERA ID SYNC LANGUAGE CAMERA RESET BACK EXIT This option allow you to adjust your camera to the day or night mode to give maximum quality of picture. You can select between AUTO/COLOR/B/W.
a) AUTO sub menu b) B/W (Black/White) sub menu BURST: Selects whether to output the burst signal when the B/W (NIGHT mode established (forcibly) status has been identified. DELAY CNT: Sets the Night/Day identification transfer time. DAY -> NIGHT: Sets the threshold for identifying the Night status from the Day status. NIGHT -> DAY: Sets the threshold for identifying the Day status from the Night status. For setting BURST mode ON/OFF. - Use ◄ or ► to change parameters value.
9) NR This function is used to set the noise reduction function. - Scroll to NR using ▲ or ▼. NR MODE - This function is used to set the noise reduction mode. C LEVEL - Sets the Y filter strength. Y LEVEL - Sets the Y filter strength. SETUP MENU PRIVACY DAY/NIGHT NR CAMERA ID SYNC LANGUAGE CAMERA RESET BACK EXIT ON AUTO ON INT ENGLISH SAVE ALL alarm shop - Press O to enter NR menu. - Use ▲ or ▼ to scroll in the menu.
10) CAMERA ID This option allows you to select a name for your camera and select rather it will be displayed or not. If selected off the name will not be displayed. CAMERA ID ABCDEFGHIJKLMNOPQRSTUV WXYZ0123789-!”#$%&’ ( )_`,: ; < = > ? @ \ ^ *. x . + / CHR1 CHR2 - Scroll to CAMERA ID using ▲ or ▼. SETUP MENU PRIVACY DAY/NIGHT NR CAMERA ID SYNC LANGUAGE CAMERA RESET BACK EXIT ◄ ► ▲ ▼ CLR POS ON AUTO ON INT ENGLISH RETURN - When finished go to RETURN and press O.
11) SYNC This option is not adjustable – it’s always on. The Line-Lock (L/L) feature allows the camera to synchronize its frame rate to the power line phase. The function is only available when the camera is operated by AC power. It allows the reduction of the fluorescent lights color rolling effect. When using 12v DC power, the camera is automatically set to internal (INT) synchronization mode.
13) CAMERA RESET Reset camera to default settings. - Scroll to CAMERA RESET using ▲ or ▼. SETUP MENU PRIVACY DAY/NIGHT NR CAMERA ID SYNC LANGUAGE CAMERA RESET Specifications MODEL Image Sensor BX-372CS 1/3” Sony DS CCD (PAL:ICX673AK/NTSC:ICX672AK) CXD4127 DSP System ON AUTO ON INT ENGLISH Effective Pixels PAL:976(H)x582(V) / NTSC:976(H)x494(V) Scanning System PAL/NTSC Horizontal Resolution 650TVL Min. Illumination 0.03 Lux / F1.
