Troubleshooting guide

Page 5
STEP 2 - Connect power
 Connect the power supply to the power input of the Video Streamer.
 Plug the power supply into a mains socket and switch on.
 Turn on power to the TV and set top box.
 Verify that programs can be seen on the TV.
The Video Streamer will automatically connect to your home network router.
STEP 3 - Check indicator lights
 To confirm correct operation, check the front panel LED indicators, and the blue LED
indicator on the Ethernet adaptor.
All indicator lights should be on. (The streaming light flashes blue for two minutes
after connecting power.) If this is not the case, refer to the Troubleshooting Guide,
page 9.
front panel Ethernet adaptor
Streaming Power
LED Description
Streaming Blue, or Blue Flashing : Normal operation
Power Green
Flashing Amber
:
:
Normal operation
Ethernet cable disconnected
Ethernet
adaptor
Blue
Off
:
:
Ethernet connected
Ethernet cable disconnected