Specifications

41
Online search
Online search function is designed for the purpose of getting a quick view of the Monitors installing situations, or to
check if each of them works or not. This is very useful for installation maintain. There are 3 different ways to use the
Online Search function, manually search, use the ID tab and use the CHALLENGER PRO CONFIG software.
When the Online search is acting, the Door Station will search every Monitor with the User Code from 1 to 32. If the
Monitor is one line(work normally), the LED light of that button will light up, and one 'Di~' sound hit will be heard; if the
Monitor is off line(disconnected or malfunctioning), the LED light of that button will not light up, and a 'Di,Di,Di' sound
hit will be heard. After 32 Monitors all be searched, the Monitor will quit out automatically, or press PB button to abort
the searching.
1. Manual search
To execute searching, just press PB button(or hold it for 3 seconds) on Door Station Connection Board, the Door
Station will start searching, and the result is shown by lighting the related Name Label backlight with sound tips. After
5 seconds, Door Station returns to normal.
• Press the PBbutton, will search the Monitors in the right Call Buttons column.
• Press the PB button and hold for 3 seconds, will search the Monitors in the left Call Buttons column.
07 08
05 06
03 04
31 32
29 30
27 28
25 26
23 24
21 22
19 20
17 18
15 16
13 14
11 12
07 08
05 06
03 04
31 32
29 30
27 28
25 26
23 24
21 22
19 20
17 18
15 16
13 14
11 12
01 02 09 10 01 02 09 10
PB button for 3 seconds
Online search range
PB button
Online search range
For Example, if 01, 03, 04, 11, 12, 13, 28 Monitors are installed and work correctly, the result will be:
07 08
05 06
03 04
31 32
29 30
27 28
25 26
23 24
21 22
19 20
17 18
15 16
13 14
11 12
07 08
05 06
03 04
31 32
29 30
27 28
25 26
23 24
21 22
19 20
17 18
15 16
13 14
11 12
01 02 09 10 01 02 09 10
press PB button and hold for 3 seconds press PB button once