Specifications

CHALLENGER PRO - System
12
State LED-A LED-B LED-C LED-D
Standby
ON ON ON ON
Authorize ADD - Card
ON OFF OFF ON
Authorize DELETE - Card
OFF ON OFF ON
Add user card
ON OFF OFF OFF
Format
ON
ON
OFF
OFF
Add user cards by Room:
Show the MASTER CARD
ADD card in standby
Press a certain button on the
Door Station, then show the
cards which to be assigned to
this Room. Then press an other
button and show the cards.....
Show the MASTER
CARD ADD card again to
confirm and exit.
Delete user cards by Room:
Show the MASTER CARD
DELETE card in standby
Press the button(s) that the
cards belong to on the Door
Station.(all cards belong to the
room will be deleted)
Show the MASTER
CARD DELETE card
again to confirm and exit.
Note 1: The MASTER CARD ADD card must be showed before the Reader can get in to the Authorize DELETE -
Card state, and make sure each operation have to take place within 10 seconds, or the Door Station will return to
normal state automatically.
Card management hints
State Operation Sound hint
standby state
show user card(registered) a long 'D~.' (door opens)
show user card(not - registered) 3 short 'Di' (Di, Di ,Di)
Card
management
state
Enter the card management state a long 'Di~' + a short 'Di' (Di~ Di)
Exit out the card management state
2 short 'Di' (Di ,Di)
Add card/Delete card/Format successful
a long 'Di~' (Di~)
Add a already existed card
2 long 'Di~' (Di~, Di~)
Add card/Delete card/Format unsuccessful
3 short 'Di' (Di, Di, Di)
Add a debug card(16666666)
4 short 'Di' (Di, Di ,Di, Di)
Add card failure (1000 cards registered)
5 short 'Di' (Di, Di ,Di, Di, Di)
Card management LED hints
LED-D
LED-C
LED-B
LED-A
PROR11/ID/D8