User manual
70
Digital Video Recorder User Manual
6.2 Manual alarm
This option is used toactivate the alarm manually, this option also activates the buzzer.
6.3 Disk management
1. Format the disk
Go to"disk management"
Note: please format the hard disk before startinga recording. If the disk is not formatted, it will show the status of
the disk-free space, and total space show OM at the bottom of screenbut the DVR will not record.
Clicking the"Refresh" button will refresh the disk information in the list.Set the property of a disk and click Apply. To formata
hard disk(s),select therelevant driveson the list and click "Format".
Note: all recorded files in the hard disk will be lost after formatted.
2. Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can monitor the temperature,
internal circuit, dielectric material of the disk, analysis the potential problems of the disk and warn so as to protect its data.
6.4 Upgrade
At present, the DVR only supports update via USB. Download the software from your vendor and make sure it matches the
DVR. You can check the USB information in Disk management; the USB must be recognized and formatted (FAT32).
Upgrade method: theuser needs to copy the upgrade software into the USB storage device and then connectit to the USB
port. Enter MenuUpgrade, the upgrade software name is displayed in the upgrade list box, select that software and then
click upgrade button. It will upgrade automatically. Never disconnect the power line during backup! Please wait for a while
when the system is rebooted.
6.5 Logoff
Click Log off icon, a log off dialogue box will popup, click OK to log off. Click any button andthe login menu will appear.