User manual

62
Digital Video Recorder User Manual
Fig 4-44 preset set-setting
b.user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the
rotate speed and the value of zoom, focus and iris of the dome;
c. select the serial number of the preset point. If relevant click button to enable the PTZ wiper and click button to
enable the PTZ light.
Note: PTZ must support wiper and light for these two functions to work. These two buttons are available only
when using PELCOP or PELCOD.
Click Save button to save the settings, click icon to hide the tool bar, right-key can remerge it; click icon to exit the
current interface.
d. in the preset interface, click OK button to save the setting; click Exit button to exit current interface without saving.
Step 3: in the Advance interface, click the cruise “Setting” button, a dialog box will pop-up as in Fig 4-45:
Fig 4-45; cruise set
a. clickthe "Add" button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup
button to see a dialog box as Fig 4-46:
b.click Add icon to set the speed and time of preset point; select a preset point and then click Delete icon to delete
that preset point; click the"Modify" icon to modify the setting of thehighlightedpreset point. Click to