User manual

Digital Video Recorder User Manual

User management configuration

Step 1: enter into system configuration =>user management configuration; refer to Fig 4-38:

Step 2: click Add button to display a dialog box as Fig 4-39:

Fig 4-39 add-general

① General: Input user name, password; select user type: normal and advance, input the MAC address of the PC; click OK

button. Then this user will be added into the user list box; click Exit button to exit the current interface.

Note: when the default value of binding PC MAC address is 0, the user is not boundtoa computer; the user can log to

the DVR with that account only if the computer has a specific MAC address.

② Authority:

After adding a user, go to authority (Fig 4-40):In the authority interface, assign the

operation limitations for that user. Click the Setup button to modify user name, user

type and MAC binding address.

To delete a user choose that user in the user list box and then click "Delete"

button.To change a password click the "Change Password" button and modify the

password; click Exit button to exit the current interface (Fig 4-38)

Fig 4-40 add user-authority

Fig 4-38 user-management