User manual

51
Digital Video Recorder User Manual
4.5.4 Other alarm
Select system configurationother alarm (as shown in Fig 4-27)
Disk full:You can choose the capacity of the disk storage
and select the related alarm. If the disk is full, the system
will perform according to the setup.
IP conflict: if there is an IP address conflict within the
same network, the system will perform according to the
setup.
Disconnect: if the system recognizesa network
disconnectionthe system will perform according to the
setup.
Disk Warning: if the disksends a warning the system will
perform according to the setup
Disk Disconnected(an important improvement): when
there is no recognized disk the system will perform
according to the setup.
Fig4-27 other alarm
Reset default setting; click the“default” button and then“apply” button to save the setting.Pressthe “exit” button to exit current
interface.
Select a hard disk in the list box. When the disk capacity is lower than that in the value, a message will appear on the lower right
of the live image.