User manual
43
Digital Video Recorder User Manual
Before repositioningafter repositioning
4.3.5 Recycle record
System configuration=>record configuration=>recycle record; mark"recycle record" to enable recycle recording. When the disk is
full the new files will overwrite the earliest files and keep recoding after the HDD is full; if You disable this function the DVR will
stop recording when the HDD is full.
Reset default setting; click the“default” button and then“apply” button to save the setting.Pressthe “exit” button to exit current
interface.
4.3.6 Snap
This option is used to set up Resolution, quality, snap shot interval andthe number of pictures taken.
4.4 Schedule configuration
Schedule configuration includes three sub menus: schedule, motion and alarm.
4.4.1 Schedule
This table representsthe days in a week from Sunday to Saturday, and on the top the 24 hours of a day. Click the grid to do
relevant setup. Blue means checked area and gray means unchecked area.
Step1: enter into system configurationschedule configurationschedule; referring to Fig 4-15: