User manual

40
Digital Video Recorder User Manual
Setup mask area Live image mask area
4.3 Record configuration
Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap for NE orHD series.
4.3.1 Enable
Step1: enter into system configurationrecord configurationenable; refer to Fig 4-11:
Fig 4-11 record configuration-enable
Step2:mark record, audio and record time to enable audio/video record.
Step3: user can setup all channels with the same parameters by marking“all”, then "apply.
Parameter
Meaning
Record
Record switch of every channels
Audio
Enable live record audio