User manual

28
Digital Video Recorder User Manual
Item
Name
Function
1
Power Button
Soft switch off to stop firmware running. Do it before power off.
2
INFO Button
Get information about the DVR like firmware version, HDD information
3
REC Button
To record manually
4
Digital Button
Input digital or choose camera
5
Multi-Screen Button
To choose multi-screen display mode
6
SEARCH Button
To enter search mode
7
MENU Button
To enter menu
8
ENTER Button
To confirm the choice or setup
9
Direction Button
Move cursor in setup or pan/tilt/zoom PTZ
10
+/- Button
To increase or decrease the value in setup
11
Playback Control Button
To control playback, Fast forward/rewind/stop/single frame play
12
AUDIO Button
To enable audio output in live mode
13
Auto Dwell Button
To enter auto dwell mode
14
BACKUP Button
To enter backup mode
15
PTZ Control Button
To control PTZ camera: Move camera/zoom/focus/iris/speed control
Operation processes with remote controller to control multi-DVR systems:
The device ID of the DVR can be changed. The default device ID is 0 (DVR and remote). To use the remote controller for a single
DVR, don't reset the device ID, You can operatethe DVR (with ID=0) directly.In case of multiple DVR systems follow these steps:
Step1:Activate remote controller to control DVR: enable DVR:point the IR ledof the remote controller to the IR receiver on the front
panel of the DVR. Press the number key 8 twice.Input device ID (Range from: 0-65535) with other digital number: 0-9. Press the
ENTER button to confirm.
Step2:User maychange the device ID of the DVR:main menu =>System configuration=>Basic configuration=>device ID. It is not
recommended to set other DVRs with the same device ID if it is in the same room. Please note that longer IDs are less convenient
to operate.
Step3:To cancel controller  DVR connection: aim the IR remote controllers led to the IR receiver that on the front panel, press the
number key 8 twice, then input the device ID that needs to be cancelled from controlling, press ENTER button to confirm. After that,
the DVR will not be controlled by that remote controller.