Operation Manual

DVR User Manual
61
3. Server list
Click button to pop up the
following picture.
 Add device: Click “Add” button in the top
right corner to pop up a dialog box as shown in
the following left picture. Input the relative
information of the device and click “Save”
button.
 Delete device: Click button behind
the device name to delete this device.
 Edit device: Click button behind the
device name to edit the information of this device.
 Backup & restore: It is recommended to click “Backup” button to reserve the information of all devices.
Then you can click “Restore” button to restore all device information after you re-install the client or reset the
device.
 indicates the device has been connected;
 indicates the device is connecting;
 indicates the device is not connected.
4. Live Preview
Once you access the device, the system will automatically display the screen mode in accordance with
the channel number of the device
Note: The maximum number of channels which can be connected are nine after login.
1. Click “Screen mode” button to select channel as shown in Fig 1.
2. When there is video playing in a screen, you can switch the channel by long pressing the screen as
shown in Fig 2.
3. When no video is playing in a screen, click this screen to choose channel as shown in Fig3.
4. When the single channel is playing, you can zoom in/out the image by swiping you finger up and down
as shown in Fig 4.
5. When the single channel is playing, the channel can be switched by swiping your finger left or right as
shown in Fig 5.
6. When multi channels are playing, drag one channel screen to the other channel screen. This will make