Operation Manual

DVR User Manual

Step 2: Connect iPhone and PC.

Step 3: Search “Provision Cam” and select it.

Step 4: Click “Download” button.

Step 5: Input username and password.

Step 6: Synchronously apply "Provision Cam"

software to iPhone/iPad.

 "Provision Cam" Instructions

1. Login

Step 1: Choose network type. There are two network connection ways:

3G/3G +WIFI, well video quality. This network supports main stream and sub

stream. The real-time image will be displayed by using sub stream.

3G-, poor video quality contrast to the above mentioned network.

Step 2: Input server, account and password.

Server: Option 1 (available only if NAT P2P server is enabled, please refer to

section 5.6.4): Click on the small QR code icon in the bottom of the login

screen then snap the QR code from the sticker on the DVR or from the DVR

interface (Menu  Information  QRCODE).

Server, Option 2: WAN IP address (or domain name) plus HTTP port of the device. For example:

210.21.183:89 or 123.dvrdydns.com:89. Note: The default http port of the device is 80. If this port is modified,

please use the modified port.

Account and Password: The login account and password of the device. The default account is admin and

the default password is 123456.

Step 3: Click【Login】button to access the device.

2. Main Interface

There are many buttons in the main interface, such as, screen mode,

favorite channel, snap, record, open/close audio, talk, PTZ., etc.

：Image view button. The pictures snapped in the live will be

checked by clicking this button.

：Playback button. Click this button to enter into playback

interface.

：Settings button. Click this button to set local configuration

(Some can also support remote configuration).

：Information button. Click this button to check lots of information