Operation Manual

DVR User Manual
51
8.3.2 Via WAN
There are also two ways for DVR to connect to Internet.
1. Connect the DVR to internet through router or virtual server.
① The network setups are the same as step one to step four of point 1 on WAN of IE remote
surveillance.
② Enter WAN IP and HTTP port in the Safari browser to install the Active control. The
concrete steps are the same as step 5 and 6 of Chapter 7.3.1.
2. Connect the DVR to internet directly.
① The network setups are the same as step one of point 2 on WAN of IE remote surveillance.
② Enter WAN IP and HTTP port in the Safari browser to install the Active control. The
concrete steps are the same as step 5 and 6 of Chapter 7.3.1.
8.4 The Remote Live Preview
Fig 7-1 Remote Live Preview Interface
1
Channel indicator
2
Screen display mode
3
Volume
4
Start recording
5
Snapping picture
6
Bidirectional talk
7
Start IE record
8
Playback
9
Master/sub stream
status
10
Color
11
PTZ control