Operation Manual

DVR User Manual
45
Fig 6-2 Information Configuration-QRCODE
7.2 Disk Management
To format the disk
① Go to disk management interface. Please format the hard disk before recording.
Note: please format the hard disk before record.
② Click Refresh button to refresh the disk information in the list box.
③ Select a hard disk and click Format button to start format.
Note: All recorded files in the hard disk will be lost after formatting.
To check other information of disk
After you go to Disk ManagementAdvanced tab, you can check model, S/N, firmware, health
status of the disk in this interface. You also can monitor the temperature, internal circuit,
dielectric material of the disk, analysis the potential problems of the disk and warn so as to
protect its data.
7.3 Upgrade
At present, it only supports USB update. Get the software from your vendor when there is a new
software version. The upgrade steps are as follows:
① Copy the upgrade software which gets from vendor into the USB storage device.
② Connect the USB flash drive to the USB port.
③ Go to Main MenuUpgrade tab. You will see the upgrade software name displaying in
the upgrade list box.
④ Select that software and then click Upgrade button. The system will be upgraded
automatically.