Operation Manual

DVR User Manual

② In the preset setting tab, enable preset, set the preset name and then click preset

“Setting” button.

Fig 4-35 Preset Setting

③ Control the dome by rotating up, up left, down, right down, left, left down, right and up

right and adjust the rotate speed and the value of zoom, focus and iris of the dome.

Note: PTZ must support wiper and light button and these two buttons are just available

when selecting PELCOP or PELCOD.

④ Select the serial number of the preset point. Click button to enable the PTZ wiper

and click button to enable the PTZ light.

⑤ Click “Save” button to save the setting. Click icon to hide the tool bar. Right click to

view this bar again. Click icon to exit the current interface.

⑥ Return to the Advanced-Preset Setting interface and click OK button to save the setting.

To set up cruise:

① In the Advanced interface, click cruise “Setting” button to see a window.

Fig 4-36 Cruise Setting