Operation Manual

DVR User Manual

② Select “Enable” and set up the value of address, baud rate and protocol according to the

settings of the speed dome.

③ Select “All” to set the same settings for all channels.

Advanced settings include preset setting, cruise setting and track setting.

Go to Main MenuSetupP.T.ZAdvanced. Refer to Fig 4-33.

Fig 4-33 P.T.Z configuration-advanced

To set up preset:

① In the Advanced interface, click preset “Setting” button to see a dialog box as Fig 4-34.

Fig 4-34 Advanced-Preset Setting

Parameter

Meaning

Address

The address of the PTZ device.

Baud rate

Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800,

9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600.

Protocol

Communication protocol of the PTZ device. Range from: NULL, PELCOP,

PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG,

RM110, HY, N-control.

Simulative

Cruise

If enabled, no matter whether the PTZ device supports cruise or not, the

presets will cruise.