Operation Manual

DVR User Manual
24
Fig 4-18 Alarm Configuration-Motion Trigger
Buzzer: If selected, the local buzzer would be activated on an alarm.
Show Full Screen: If selected, there will pop up the chosen channel on the monitor on an alarm
trigger.
Email: If selected, the DVR will send an email alert to the preconfigured email address in case
of a motion based alarm from the particular input.
Snap: If selected, the system will snap images of the checked channels on an alarm and save
them in the HDD automatically.
④ Go to To Record tab. Select recording channels. It would be recorded in case of an alarm.
Click OK button to save the setting.
⑤ Go to “To PTZ” tab. Set preset, cruise and track options for a PTZ in case of a sensor based
alarm. Single or multiple PTZ units could be programmed to perform this function on the
same alarm.
⑥ After clicking Area button, a dialog box will pop up as Fig 4-19.
Fig 4-19 Motion-Area
⑦ In the Area interface, you can drag slide bar to set the sensitivity value (1-8). The higher
the value is the more sensitive it is to motion. Since the sensitivity is influenced by color