Operation Manual

DVR User Manual
18
To set up mask area:
① Go to Main MenuSetupLiveMask interface.
Fig 4-9 Live Configuration-Mask
② Click “Setting” button to go to live image.
③ Press and drag the left mouse button to set mask area as shown below.
④ Right click to exit the mask setting interface.
⑤ Click “Apply” button to save the setting.
To delete mask area:
① Click “Setting” button in the mask interface.
② Select a certain masked area and double click to delete that masked area.
③ Then click “Apply” button to save the setting.
Fig 4-10 Setting Mask Area
5.3 Record Configuration
Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp
and snap.
Before Configuration, please make sure your DVR has been installed with HDD and has
completed its initialization.