Operation Manual

DVR User Manual
17
Fig 4-7 Live-Color Adjustment
5.2.2 Main Monitor
The main monitor settings allow you to set camera sequence in live display mode.
Operate the following steps to set main monitor:
① Go to Main MenuSetupLiveMain Monitor interface. Refer to Fig 4-8.
Fig 4-8 Live Configuration-Main Monitor
② Select display mode and channel.
③ Select dwell time. Click button to set up the previous channel groups of dwell picture.
Click button to set the latter channel groups of dwell picture.
④ Click “Apply” to save the setting.
5.2.3 Mask
If there is something you don’t want to display in the live image. You can set mask. For a given
channel a maximum of three areas can be masked.