Operation Manual

DVR User Manual
15
5.1.2 Date & Time
① Go to Main MenuSetupBasicDate & Time interface. Refer to Fig 4-4.
Fig 4-4 Basic Configuration-Date & Time
② Set the date format, time format, time zone in this interface; checkmark “Sync Time With
NTP Server” to refresh NTP server date. You can also adjust system date manually.
③ Click “Apply” button to save the setting.
5.1.3 DST
① Go to Main MenuSetupBasicDST interface. Refer to Fig 4-5.
Fig 4-5 Basic Configuration-DST
② In this interface, enable daylight saving time, time offset, mode, start & end
month/week/date, etc.
③ Click “Apply” button to save the setting.