Operation Manual

DVR User Manual
9
3 Basic Function Instruction
3.1 Power On/Off
Before you power on the unit, please make sure all the connection is good.
3.1.1 Power On
① Connect with the power.
② The device will boot and the power LED would turn blue.
③ A WIZARD window will pop up and show some information about time zone, time setup,
network configuration, record configuration and disk management. User can set up here
and refer to the concrete setup steps from the corresponding chapters. If users don’t
want to set up Wizard, please click Exit button to exit. Press and hold FN/ESC key to
switch the resolution of VGA and HDMI output.
3.1.2 Power Off
You can power off the device by using remote controller, keyboard or mouse.
① Go to Main Menu and then select “Shut Down” icon to pop up the Shut down window.
② Click OK. Then the unit will power off after a while.
③ Disconnect the power.
3.2 Login
User can login or log off the DVR system. Once logged off the user cannot do any other operation
except changing the multi-screen display.
Fig 3-1 Login