User manual

54
Digital Video Recorder User Manual
4.8 P.T.Z configuration
P.T.Z configuration includes two submenus: serial
port and advance ① Serial port
System configuration => P.T.Z configuration => serial
port; Refer to Fig 4-36: mark "Enable" and then setup
the value of that camera (address, baud rate and
protocol according to the settings of the speed dome).
To setup all channels with the same parameters choose
“all” then apply to save relevant setup to all channels.
Reset default setting; click the “default” button and
then “apply” button to save the setting. Press the “exit”
button to exit current interface.
Fig 4-36 P.T.Z configuration-serial port
Definitions and descriptions of network stream:
③ Advance
Configuration => P.T.Z configuration => advance; Refer to Fig 4-37: click preset “Setting” button to see a dialog box as Fig 4-38:
Parameter Meaning
Address The address of the PTZ device
Baud rate Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400,
4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600.
Protocol Communication protocol of the PTZ device. Range from: NULL, PELCOP,
PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA,
SAMSUNG, RM110, HY, N-control.