User manual
39
Digital Video Recorder User Manual
4.5 Alarm configuration
Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out.
4.5.1 Sensor
Sensor includes three sub menus: basic, alarm handling and schedule.
• Basic
system configuration => alarm configuration => sensor =>
basic; Refer to Fig 4-19: Enable sensor alarm and then
set the alarm type according to triggered alarm type. Two
option: NO and NC (Normally open/closed).
To setup all channels with the same parameters mark “all”
then apply to save relevant setup to all channels.
Reset default setting; click the “default” button and then
“apply” button to save the setting. Press the “exit” button
to exit current interface.
• Alarm handling
Step1: enter into system configurationalarm
configurationsensoralarm handling; refer to Fig 4-20:
Fig 4-19 alarm configuration-sensor-basic
• Alarm handling
system configuration => alarm configuration => sensor => alarm handling; refer to Fig 4-20: select hold time, click Trigger
button, and a dialog box will pop-up as Fig 4-21: If Buzzer is selected, the sensor will prompt an alarm.