User manual

27
Digital Video Recorder User Manual
4 Main menu setup guide
Click right mouse or press ESC button on the front panel: the control bar will appear on the bottom of the screen, refer to Fig 4-1:
Fig 4-1 main menu toolbar
Click the icon beside "screen mode" to select the channels. There is an option for 6/8/13 channels with a main channel in the
middle of the screen. You can arrange the order by drag and drop for the live display.
Dwell: this mode is used to display a 1/4/6/9/16 picture-screen that alternate every few seconds. To modify the settings go to main
menu=>setup=>live=>main monitor.
Color: this mode is used to adjust the color of the live pictures.
E-Zoom: this mode is used to digitally magnify an image on live or recorded data: Left click the picture, right click and select Zoom.
Simply press left mouse and drag the picture to view different parts of the image. Double-click the left mouse to exit E-Zoom mode.
Volume: this mode is used to mute or unmute and to select the audio channel if the audio out is connected to an amplified monitor.
PTZ: this mode is used to control pan/tilt/zoom and to access the menu of some smart PTZ cameras. The control will change
rotation position, speed of the dome and start track, auto scan or cruise in this interface. Refer to PTZ manual for more details.
Snap: (NE series) click this button to create a snapshot of the live cameras. These pictures will be saved on the SATA disk.
Record: this mode is used to start or stop continues record.
Playback: this mode is used to start playback of the last 30 minutes recorded on the DVR.
Move tool: this mode is used to move the menu.
Function menu: this mode is used to reach the main menu as Fig 4-2; you can also press MENU button on the front panel or
operate with remote controller to display the main menu. Click Setup icon will pop-up the configuration menu: