User manual

Digital Video Recorder User Manual

Item

Name

Function

1 Power Button Soft switch off to stop firmware running. Do it before power off.

2 INFOR Button Get information about the DVR like firmware version, HDD information

3 REC Button To record manually

4 Digital Button Input digital or choose camera

5 Multi Screen Button To choose multi screen display mode

6 SEARCH Button To enter search mode

7 MENU Button To enter menu

8 ENTER Button To confirm the choice or setup

9 Direction Button Move cursor in setup or pan/tilt/zoom PTZ

10 +/- Button To increase or decrease the value in setup

11 Playback Control Button To control playback, Fast forward/rewind/stop/single frame play

12 AUDIO Button To enable audio output in live mode

13 Auto Dwell Button To enter auto dwell mode

14 BACKUP Button To enter backup mode

15 PTZ Control Button To control PTZ camera: Move camera/zoom/focus/iris/speed control

Operation processes with remote controller to control multi-DVR systems:

The device ID of the DVR can be changed. The default device ID is 0 (DVR and remote). To use the remote controller for a single

DVR, don't reset the device ID, You can operate the DVR (with ID=0) directly. In case of multiple DVR systems follow these steps:

Step1: Activate remote controller to control DVR: enable DVR: point the IR led of the remote controller to the IR receiver on the

front panel of the DVR. Press the number key 8 twice. Input device ID (Range from: 0-65535) with other digital number: 0-9. Press

the ENTER button to confirm.

Step2: User may change the device ID of the DVR: main menu => System configuration=>Basic configuration=>device ID. It is not

recommended to set other DVRs with the same device ID if it is in the same room. Please note that longer IDs are less convenient

to operate.

Step3: To cancel controller  DVR connection: turn the IR led of the remote controller to the IR receiver that on the front panel,

press the number key 8 twice, then input the device ID that needs to be cancelled from controlling, press ENTER button to confirm.

After that, the DVR will not be controlled by that remote controller.