User manual

21
Digital Video Recorder User Manual
2.4 Remote Controller
The remote requires two AAA size batteries. For installing the batteries open the battery cover on the Remote Controller, place two
batteries according to the correct polarity marked on the remote (+ and -), then fasten the battery cover to back its place.
Notice: if the remote is not working follow those steps:
1. Check batteries poles are according to the marking inside the remote and check the remote.
2. Replace the batteries and check the remote.
3. Check IR sensor is not covered and check the remote.
if you suspect the remote is malfunctioned contact your dealer to replace your remote control unit
The interface of remote controller is shown in Fig2.8 Remote Controller.
Fig 2.8 Remote Controller