User guide

ManualsBrandsProvision ISR ManualsConsumer electronicsPTG-01

ASUS PTGD1-LA (Grouper-GL8E) motherboardASUS PTGD1-LA (Grouper-GL8E) motherboard

ASUS PTGD1-LA (Grouper-GL8E) motherboard

Make sure to unplug the power supply before adding or removing DIMMs

or other system components. Failure to do so can cause severe damage

to both the motherboard and the components.

Follow these steps to install a DIMM.

1. Unlock a DIMM socket by

pressing the retaining clips

outward.

2. Align a DIMM on the socket such

that the notch on the DIMM

matches the break on the

socket.

3. Firmly insert the DIMM into the

socket until the retaining clips

snap back in place and the DIMM

is properly seated.

Installing a DIMMInstalling a DIMM

Installing a DIMM

Table 1Table 1

Table 1

Recommended memory configurationsRecommended memory configurations

Recommended memory configurations

Table 2Table 2

Table 2

Memory frequency/CPU FSB synchronizationMemory frequency/CPU FSB synchronization

Memory frequency/CPU FSB synchronization

* Use only identical DDR DIMM pairs.* Use only identical DDR DIMM pairs.

* Use only identical DDR DIMM pairs.

CPU FSBCPU FSB

CPU FSB

DDR DIMM TypeDDR DIMM Type

DDR DIMM Type

Memory FrequencyMemory Frequency

Memory Frequency

800 MHz PC3200/PC2700/PC2100 400/333/266 MHz

533 MHz PC2700/PC2100 333/266 MHz

UnlockedUnlocked

Unlocked

retainingretaining

retaining

clipclip

clip

DDR DIMM notchDDR DIMM notch

DDR DIMM notch

Sockets Sockets

Sockets

ModeMode

Mode

DIMM1DIMM1

DIMM1

DIMM2DIMM2

DIMM2

DIMM3DIMM3

DIMM3

DIMM4DIMM4

DIMM4

Single-channel (1) Installed — — —

(2) — Installed — —

(3) — — Installed —

(4) — — — Installed

Dual-channel* (1) Installed — Installed —

(2) — Installed — Installed

(3) Installed Installed Installed Installed