Operation Manual

2 Hardware Installation
Check the unit and the accessories after getting the device. Please don’t power up the unit until the
physical installation is complete.
2.1 Hard Drive Installation
Notice: 1. This series supports one SATA hard drive. Please use the hard drive the manufacturers
recommend specially for security and safe field.
2. Please calculate HDD capacity according to the recording setting. Please refer to
“Appendix B Calculate Recording Capacity”.
Step 1: Loosen the screws to open the top cover.
Step 2: Connect the power and data cables and then place the HDD onto the bottom case as Fig 2-1.
Step 3: Secure the HDD with the screws as Fig 2-2.
Fig 2-1 Connect HDD Fig 2-2 Screw HDD
Note: For convenience installation, please connect the power and data cables first and then fix the
HDD by tightening the screws.