Operation Manual
initial password is 123456), or you can use the digital keys on the front panel, or the digital keys on the
remote controller.
Q11: A hard disk is being identified as a new device however it was being used with another NVR of same
model. Should it be formatted prior to use?
It is possible to migrate an HDD from one NVR to another provided that the NVRs are of the same model
and that the HDD being migrated would be used as the sole disk in the new NVR. However in cases where
the new NVR already contains a HDD, the migrated disk being installed would have to be formatted. In
general migrating disks from one NVR to another is not recommended.
Q12: What is the minimum configuration required for remote monitoring?
PC Module
Parameters
CPU
Intel Celeron 2.4G
Motherboard
Intel 845
HDD
80G
RAM
512M
VGA
NVIDIA GeForce MX440/FX5200
ATIRADEON 7500/X300
OS
Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA
DirectX
9.0
Q13: How to handle the situation that the codec Control is blocked when downloading in the VISTA or Win7
system?
This problem can be fixed in two ways:
a. Enter Control PanelUser Account and Family Safety User Account Control (refer to Fig 13-1);
click Turn User Account on or off. Cancel Use User Account Control (UAC) to help protect your
computer.
b. Right click IE browser (refer to Fig 13-2), select Run as administrator to run browser.
Fig 13-1 Fig 13-2