Operation Manual

：Favorite channel display button. If you save your favorite channel in the favorite server list, clicking
this button will directly play all favorite channels you have saved.
：Snap button. Choose the channel and click this button to capture the channel image.
：Local record button. Choose the channel and click this button to start recording.
： Open/Close audio. Choose the channel and click this button to open/close the audio of this
channel.
：Open/Close talk. Click this button to pop up the servers which support talk function. Select the
device to start talking.
：Set video parameter button. Select the channel and click this button to set the video parameters
including brightness, hue, saturation and contrast.
：PTZ button. Click this button to pop up PTZ control panel.
：Choose bitrate priority or quality priority according to your network
condition.
Channel indicator instruction:
：Video loss ： Schedule recording ：Others
：Sensor alarm ：Motion alarm
：Motion /sensor alarm based recording or manual recording
3. Server list
Click button to pop up the
following picture.
 Add device: Click “Add” button in the top
right corner to pop up a dialog box as shown
in the following left picture. Input the relative
information of the device and click “Save”
button.
 Delete device: Click button behind
the device name to delete this device.
 Edit device: Click button behind
the device name to edit the information of this device.
 Backup & restore: It is recommended to click “Backup” button to reserve the information of all devices.
Then you can click “Restore” button to restore all device information after you re-install the client or reset the
device.
 indicates the device has been connected;