Operation Manual

Screen display mode:
Snap pictures
The system will automatically capture pictures and save those pictures in the computer by clicking “Snap”
icon,
User should set up the path for those pictures in the ConfigurationLocal configuration.
Color adjustment:
Drag the slide bar to adjust Brightness, Contrast, Hue, and Saturation. Click Default to reset them to
original value.
Buttons
Description
Drag the scroll bar to adjust the brightness of channel
Drag the scroll bar to adjust the contrast of channel
Drag the scroll bar to adjust the saturation of channel
Drag the scroll bar to adjust the hue of channel
Click this button to recover the default value of brightness,
contrast, saturation and hue.
Save the adjustment
PTZ control
Please connect speed dome to the device via RS485 firstly, make sure the protocol of the speed dome is
supported by the device and set the relative parameters manually. User can control the dome up, down,
right, left or stop rotating on Control Center, adjust rotation speed, Iris and zoom, focus on the dome, and
set the presets, etc.
Buttons definition:
Buttons
Description
to rotate the dome upwards. to rotate the dome diagonally up-left.
to rotate the dome diagonally up-right to rotate the dome downwards.
to rotate the dome diagonally down-right to rotate the dome diagonally
down-left to rotate the dome towards left. to rotate the dome towards
right to stop rotating the dome.
Drag the scroll bar to adjust rotating speed of the dome.
'Iris' button. Click button near 'Iris' button to increase light of the dome.
Click button near 'Iris' button to decrease light of the dome.
'Zoom' button. Click button near 'Zoom' button to zoom in the locale
picture of this camera. Click button near 'Zoom' button to zoom out the
locale picture of this camera.
'Focus' button. Click button near 'Focus' button to have long focus. Click
button near 'Focus' button to have short focus.
Go to the Preset