Operation Manual

2) On the DVR Under Main menu => Settings => “Config” => “Network” set the correct DNS servers;
For example take a look at the correct settings on the figure below; the router's IP address is 10.0.0.138, the
e-mail account registered is [e-mail], and the host domain registered is "home.provision-isr-dns.com".
3) As shown on figure above: Check the “DDNS” check box, select “mintdns” for DDNS type, and fill in
all the other fields.
4) Make sure you have the preferred & alternate DNS servers filled in (under the “Network” settings
section): the preferred server should be the Internet gateway and the alternate server should be a
different DNS server– for example one of Google's DNS servers (IP 8.8.8.8 or 8.8.4.4)
5) Click the “Test” button
a. If the test succeeds click the “Apply” button
b. If the test fails check all fields again or call the support helpline
6) Now you can access the DVR using the DDNS (http://home.provision-isr-dns.com)
5.7 User Management Configuration
This tab allows you to add normal or advanced users. To add user and set up user authority:
Step 1: Enter into MenuSetupUsers. Refer to Fig 5-27:
Fig 5-27 User Management Configuration
Step 2: Click Add button to display a dialog box as Fig 5-28: