Operation Manual

Pre-alarm Record Time: Set the time in seconds to pre-record before the actual recording begins.
Post-alarm Record Time: Set the time in seconds to post-record after the actual recording has finished, five
options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire Time: Set the expiration time for recorded video. If the set date is overdue, the recorded files will be
deleted automatically.
5.3.4 Stamp
This provides an option to enable or disable the Camera Name and the Time stamp on the video. The user
can also choose a position for the stamp on the screen.
To set up stamp as follows:
Step 1: Enter into Menu SetupRecordStamp interface. Refer to Fig 5-13:
Fig 5-13 Record Configuration-Stamp
Step 2: Checkmark camera name and time stamp. Click Setting button to set up the position of the stamp.
You can drag the camera name and time stamp at random positions as shown below.
Step 3: Select “All” to set up all channels with the same parameters.
Before drag After drag
5.3.5 Recycle Record
This option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete
the old records and recycle the space if it is completely utilized. The setting steps are as follows:
Step 1: Enter into MenuSetupRecord Recycle Record interface;
Step 2: Checkmark recycle record to activate auto recycling. If the option is disabled or not selected, the
NVR would stop recording once HDD is full.
Step 3: Click “Apply” button to save the setting.