User manual
If you do not see this message, the domain name you requested is already in use and you will
be requested to provide an alternate domain name (please note: domain name is sometimes
called host name).
You can create up to 35 domain
records under a single account
5) The domain name is added at the beginning of your DVR's address, for example the
domain "home" will appear as home.provision-isr-dns.com.
NVR Setting
Connect NVR to the Network Client.
Step 1: Enter into Main menuNetworkOther Settings, checkmark DDNS, select
“dvrdydns” at the DDNS Sever pull down list box and input user name and password.
Step 2: Enter into configuration interface of the router to map the server port and IP address.
Click Save button to save the setting
Step 3: Login IE browser and input registered domain name “http://www.xxx.dvrdydns.com”,
connect to NVR client.
You can also quickly register the domain name in this interface.
Step 1: Set the IP address manually in the network tab and then click “Other Settings” tab.
Step 2: Check “DDNS”.
Step 3: Select “www.autoddns.com” in DDNS Type column as shown above.
Step 4: Enter the host name at random, like 123.
Step 5: Click “Register” to register the domain name. When the successful prompt pops up, it
means you successfully register your domain name.
If your IP address is not WAN IP address, you should forward your IP address and port in your
router. Then you can use the domain name plus HTTP port to access your device.