User manual

Fig 5-25 Network Configuration-Server
5.6.4 Other Settings
If your NVR is set to use PPPoE as its default network connection, you may setup DDNS to
be used in connection. The setting steps are as follows:
Step 1: Enable DDNS server.
Step 2: Select DDNS server.
Step 3: Enter user name, password and host domain name of the registered website.
Step 4: Click “Test” button to test the effectiveness of the relevant information.
Step 5: Click “Apply” button to save the setting.
Fig 5-26 Network Configuration-Other Settings
Note: The domain name selected by user is a banding domain name of NVR. User
should logon the website provided by the server supplier to register a user name and
password and then apply for a domain name online. After the successful application,
user can access the device from the IE client by inputting that domain name.
1． Domain name Registration （http://provision-isr-dns.com）
Note: DDNS is used to register for a hostname with DDNS username and password.
Provision ISR now allows you to use our mint DDNS server in order to create
a virtual address for your DVR on the internet. Each account can create up to