Operation Manual

Input the name and password of Apple PC and then click “OK” to install this Active X control.
Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click Safari
icon on the desktop and select “Quit” button to quit the browser. Then restart Safari browser. Input the IP
address and http port to enter the login interface of NVR.
8.3.2 On WAN
There are also two ways for NVR to connect to Internet.
1. Connect the NVR to internet through router or virtual server.
Step 1: The network setups are the same as step one to step four of point 1 on WAN of IE remote
surveillance.
Step 2: Enter WAN IP and http port in the Safari browser to install the Active control. Then a window pops
up and asks for user name and password. Input name and password correctly, and enter to view.
2. Connect the NVR to internet directly.
Step 1: The network setups are the same as step one of point 2 on WAN of IE remote surveillance.
Step 2: Enter WAN IP and http port or domain name in the Safari browser to install the Active control. Then
a window pops up and asks for user name and password. Input name and password correctly, and enter to
view.
8.4 Remote Preview
Fig 8-1 Remote Live Preview
Symbol and function Definitions:
1
Channel indicator
2
Screen display mode
3
Volume
4
Start IE record
5
Snap
6
Start talking
7
Start recording
8
Playback
9
Master/sub stream status
10
Color
11
P.T.Z control
Note: Click button to record manual and the record file will be saved in user’s PC.